How to purchase inflatable water park

 How to purchase inflatable water Park

1. You need to find a really manufacture for the pool-inflatable-water-Park.html target='_blank'>inflatable water Park

1.1 why you need to find a really inflatable water park factory

First, the really inflatable water park manufacture could offer the best price, and the manufacture could keep the quality as you need.

If you deal with a trading company, when you need to confirm the inflatable water park details, that may be easy to have mistaken for the details, because the trading company needs to confirm with the factory after a talk with you.

1.2 How to find an inflatable water park factory

Most manufacture of China at three places, Guangzhou; shanghai; Zhengzhou, so best choice the manufacture from those three places.

The real manufacture could offer the 3D design photos for you in a short time, the sales of the manufacture more profession than the trading company.

You could cooperate with some different supplier’s quotation sheets, the professional quotation sheet maybe is from manufacture. And the price of the manufacture of maybe cheaper(some of them may be expensive).

2. You need to make sure the quality

2.1 how to make sure the quality is good

First, need to check all the details for the inflatable water park, the good details should have as follows:

1. TUV certification should behave

2. Anti-UV&heat resistance material

We use customized anti UV&heat material makes the life span of the floating water park 30%-50% longer than normal material that most suppliers have been using, especially for the strong UV and high-temperature area. Here is the comparison between the material after 20 months of outdoor and brand new material, after 20 months exposed outdoor in Melbourne, the material is still about 80% new.

3. Double connection systems

We originally designed double connection systems that make the whole water park very stable and robust even in the bad weather. This connection system is patent protected.

3. You need to get a suitable price

3.1 how to get a suitable price

The best way is to compare with many suppliers, the same inflatable water park to compare the price, you will get a different price, some high some cheaper. Now what you need to do is cut down the highest and the lowest, then use the middle rate to bargain with higher suppliers, maybe after 3 times, you will get a suitable price for this inflatable water price.

4. You need to make sure your water park is fine before shipping

4.1 how to check the quality of the goods

You need to get an inflatable water park quality standard before produce and need to be remarked at the PI.

You need to let the supplier make 3D design photos before to make sure every part is fine.

After the goods finished, when they test it, you need to check all the detail, if there has any different, you need to let them know it and modify. The most important thing is the test videos must behave.

5. You need to keep your money safe

5.1 how to make sure your money is safe

First, the supplier’s bank account must be the company’s.

For the deposit, 30% is ok, not need too much, after all, details are checked, then pay the

Balance payment. If you have a friend in China, you could let your friend check the goods before you pay the balance payment.

6. How to get your water park from the customs

6.1 how to do when shipping company notice your goods will arrive

One week before goods arrive, the shipping company will notice goods will arrive and will let you know what kind of documents do you need to prepare.

The custom clearance documents we will prepare for you, if you have a shipping agent, just need to send all the documents to your agent. The other things all be dealt with by your agent. If you don't have a shipping agent, we will introduce one to you.

After pay the custom clearance cost you just wait for the shipping company to send the goods to your door.

7. How to install your water park

1、Preparation

To anchor a normal park with 18-22 play items, about 20 concrete blocks are needed, each with a weight of 450KG, into which metal rings must be inserted during productions. "sea Anchor Blocks" are available factory-made but can also be constructed independently, by joining lighter blocks, These blocks must be placed into the water near the installation site, then maneuvered by divers using a hoisting buoy to the anchoring points of the park. For the use of hoisting buoys. a minimum water depth of 1.7 m is needed.

At the same time satisfy the three conditions can be used as a fixed anchor point of the concrete blocks 
1. the weight can be up to standard
2. the rope can be through the hole
3. for a long time in seawater is not broken

The following figure:

2. Transport

Transport the elements to the sea 、 lakeshore or pool. Each element of the water park are heavy(e.g. 100-200KG, and could reach up to 700KG for an extreme size park); therefore use of smaller equipment, For example, a forklift truck is advised for moving individual elements from the truck/warehouse to the shore

3.inflation

Note: Do not fully inflate inflatable elements(especially in the morning), as they will expand in the sun.90% of the units are equipped with a safety deflation valve. The ones not equipped with such valve should be inflated to pressure levels similar to other items(0.05-0.07 bar).

Unpack the park elements and open the valve cap

a.)Insert the nozzle of the pump into the valve, and lock it in place by twisting it clockwise, Start the pump to start inflating the element - you will need 230V power supply for this

b.)When you have inflated the product up to about 85% first shut off the pump, then disengage it by twisting it counterclockwise (check with a manometer that the pressure it 0.05-0.07 bar), and cover the valve

C.)For park elements with a "D" securing ring on their bottom, connect the flexible rope as shown in the image. Individual elements contain a different number of fixing points - if possible, connect a flexible rope to each of them.

Once you have inflated all elements, place them one by one on the water near the shore, and connect them according to the plans of the park. Use the D-rings located at the bottom of individual elements and the securing straps that join them for this. (see Figures 13-14-15-16).

Although certain elements of the water park are heavy, after inflating them they can be put to water manually (6-8 people). If you have purchased a large, extreme size water park, you will need a crane truck to lift the heavier elements onto the water surface. To facilitate lifting, we have fitted larger elements of the water Park with D-rings.

Elements fitted with top eyelets should be joined using a securing rope threaded through the eyelets

Having connected the elements, cover their union with the Velcro flap

D-ring and belt buckle connecting two elements

4.Towing to the final location

After connecting the elements of the water park on the shore, very slowly tow them - with a jet ski, speedboat or boat -to their final location, using flexible ropes fitted into the bottom D-ring securing points of a larger element(e.g.Lifeguard Tower, Action Tower). Divers should arrange the concrete blocks maneuvered there during preparations proportionally underneath the park and secure the park elements to the anchoring weights using flexible ropes(in deeper water extend the ropes). if you have also purchased individual park elements(e.g. Iceberg, Water Totter A-B-C, Saturn Rocker, water roller), place them in the area of the park, and secure those that require this.

the park will require no regular follow-up inflation, however, pressure checks need to be carried out several times a day. For this, we supply a pressure gauge, an electric pump to replace the lost air and a manual pump for smaller quantities of air replacement

5.safety zone

Cordon off the area of the water sports park with safety buoys

6.safety rules

Users of the water park must wear a safety vest.

The water depth should always conform to the minimum value for the given element! The minimum water depth can be calculated simply: height of the product + height of an average person (180CM), Diving the result by two.E.g., the height of the Action Tower is 3M which gives 3m Plus1.8m divided by 2 equal 2.4 meters.

A steward must be present to ensure the correct use of the park elements.

Users may not wear hair clips, watches, necklaces, bracelets, anklets, rings, or any other sharp object while playing in the park. People with heart conditions or high blood pressure may not use the park